XR Sym Casing

Please check the home page to understand the batch shipping system before making your order 

Kit includes:

• Machined lid
• Nylon Carbon Fibre 3D printed Casing
• Printed soft gasket
• Clear LED Window installed
• All relevant bolts
• 2x M20 cable glands
  
• 1x Goretex Breathe patch

System Guide

This casing is designed for symmetrical onewheel builds, with a need to utilise equal volume in the nose and tail. 

It's suited to an 18s2p 21700 pack at the largest, with identical sizing to the XR Battery Casing. 

The casing is designed to fit a short format 19mm pushbutton, and has no charge port. Therefore, the Charge port variant of the XR Battery Casing is necessary, or another method for charging needs to be found.

The Casing requires grinding of the forwardmost notches in the XR rail (if your rail has them), and a torque bumper modified to fit the bolt pattern at the nose side of the XR Frame.  

The Jetfleet F6/ Thor 300 can be mounted to the lid, or no mount can be applied to use the Fusion Core.

Unlike the GT Sym Casing, there are no M6 accessories ports due to limited room. Footpad data needs to be forked into the wire harnesses and enter via the M20 cable glands.

The Superflux plug fits this casing on both sides

Overall, this casing requires the most custom work of any component, I wish you the best of luck. 

3D files available on the discord server