XR Stock Controller Casing

Kit comes fully constructed with:

• A machined lid of selected colour
• A black composite plastic casing
• Soft lid gaskets
• A breathe patch
• All Bolts 
• A clear LED window
  
• Battery and motor cable glands
• A 6 pin switchcraft footpad connector

The XR Stock Controller Casing is designed for standard Onewheel XR build configurations, with a VESC controller in the nose and a battery mainly in the tail.

It's compatible with the JetFleet F6, Thor 300/400 and the Ennoid MK8.

The machined aluminium lid ensures extreme strength and accuracy, whilst the composite soft and hard plastic casing ensures both protection and shatter resistance. 

The casing is typically waterproof after assembly thanks to its gasket design, though waterproofing should always be tested with a TFL Badger kit before use. 

The superflux motor plug is the most appropriate for this casing design.  

This casing requires the use of a standard XR BANG Bumper from the float life.

• Gasket Details:
  The gasket fits into a machined groove in the lid allowing for a tighter tolerance, reducing the wall width across the entire design and increasing internal volume.
• Bolt Details:
  The Bolts are designed to be as long as possible in different sections of the casing to compress as much plastic as possible, increasing strength. The Bolts are M3 sized near the LED window and M4 sized elsewhere.
• Printing details:
  The casings compositely-printed with tough TPU68D in thicker sections for increased toughness, and PPA-CF in thin, flat sections for rigidity. 
  Every outside face of the casing is TPU68D, making an environment-exposing shatter extremely unlikely.