GT Controller Casing

Whats included:

• VOW GT Controller Casing and Lids
• pre-installed padding and gasket foam 
• pre-installed PETG LED window
• 1x 20mm Goretex breathe vent patch
• 36x M3 Torx Lid bolts
• 4x M5 Torx mounting bolts
• 2x M20 Cable Glands
• 6 pin Switchcraft to 3 pin JST-PH2.0 for VOW GT footpad input.

Whats needed to complete the functional board power system:

• Boost Battery built to spec (Depending on build intention)
  
• Appropriate 19mm pushbutton 
• LED bar, Ava-spark recommended (155mm length max)
• VESC Controller (LilFocer/Tronic or Thor mount)

THE VOW GT CONTROLLER CASING IS INTENDED TO BE USED ALONGSIDE THE VOW GT BATTERY CASING AND VOW GT MUSHIES SET

The VOW GT system is a full commitment to a design that utilises flat plate casings in order to create a more optimised build volume and a better ride.

This casing is designed around Lil-Focer V3/Tronic 250R or Thor sized controllers and is capable of using a boost pack to achieve 24s2p.

The Casing is fully printed out of Bambu Lab PAHT-CF, or High Temperature Nylon Carbon Fiber. This is an exceptionally durable plastic with strength properties that up to double standard plastics, and a heat resistance of up to 200°C.

The Lid is machine laser-cut 3mm aluminium plate with countersinks, being both low cost and outstandingly strong.

The casing and lid utilise a neoprene sponge foam gasket with a minimum width of 7mm in order to seal itself against street juice. Whilst it is designed to be waterproof, this is only guaranteed by using a Badger Onewheel Waterproofing kit. 

The casing uses M3 heat pressed inserts and 6mm M3 torx screws to secure its lid.

The motor output and battery input is M20 sizing, suiting glands and motor plugs.

The LED window is made of sheet PETG and attached with double sided gel tape, Ava-spark LED's are recommended for ultrabright results.

This casing is designed to be compatible with any GT Front bumper such as BANG's, Bash, Free-ride or stock.

In order to use a 4s2p 21700 booster, the extended lid needs to be used and your front bumper needs to be heavily modified. Regular lid fits unmodified bumper

Download the following VOW GT Build guide for a deeper dive into the entire system:

VOW GT SYSTEM DIAGRAMS

Here are files if you're interested in printing your own

VOW GT CONTROLLER CASING FILES