GT V3 Sym Casing

Please check the home page to understand the batch shipping system before making your order 

Kit includes:

• Machined lid of selected colour
• 3D Printed Casing of selected material
• Printed soft gasket
• Clear LED Window installed
• All relevant bolts
• 2x M20 and M6 cable glands
• 2x M6 bolts (for sealing unused M6 ports)
• 1x Goretex Breathe patch

System Guide - (V2 / Mildly Outdated)

This casing is designed for symmetrical onewheel builds, with a need to utilise equal volume in the nose and tail. 

The GT V3 Sym casing sees significant improvements, such as led window reinforcing blocks, longer bolts to assist the structure of the printed section, and the ability to be printed at 45 degrees for better strength. 

The rightmost M20 port is also slanted to suit a superflux plug, keeping the plug as far as possible away from the motor. 

Thanks to improved wall, bolt, and gasket design, V3 Sym Casing has equal volume to the GT V3 Battery casing, and easily fits a 20s2p Samsung 50s cell ME4T pack. 44mm height, 222mm width, no compromise.

This box does require the nubs on the BANG Bumper that extends upwards on the wheel-side to be removed. It is a small mod that can be done with a sharp enough knife and some care.  

The casing is designed to fit a short format 19mm pushbutton.

The JetFleet F6/Thor 300/Thor 400 can be mounted to the lid if the lid mount option is selected.

There are two M6 accessories ports underneath the M20 cable glands, these are intended for footpad julet cables or LED accessories.  

3D files available on the discord server